Company News Archives

AE Group Participating in the 14th China International Hi-Tech Exhibition

Posted on December 17, 2012

The 14thchina international Hi-tech exhibition, approved by the State Council, which is co-sponsored by the Ministry of Commerce, Ministry of Science and Technology, Ministry of Information Industry,the national development and Reform Commission, Ministry of education, Chinese Academy of Sciences, Shenzhen Municipal People’s government and co-organized by the Ministry of agriculture and the Chinese Academy of Engineering, is held ceremoniously in Shenzhen convention and exhibition center, November 16th -21st,2012.

AE group, which participated in the exhibition, shows the 16KG industrial robot and sand belt machine operation and 50KG industrial robots and other products in the exhibition hall9 ,Museum of Anhui.

Exhibition

The independent R&D and production capacity of AE group industrial robots and robot core components not only attracts attention to a large number of well-known domestic enterprises, also gets great evaluation from the State Department of Commerce, Ministry of science and technology, the provincial government of Anhui and Guangdong.

Exhibition

Exhibition

Exhibition

Exhibition

Exhibition

Exhibition

A&E Took Parts in CIMES2012

Posted on June 15, 2012

Vogel Online News A&E Group highlighted CIMES2012. The 11th China International Machine Tool Exhibition jointly organized by the China National Machinery Industry Corporation and China National Machine Tool Corporation. China International Machine Tool & Tools Exhibition (CIMES) is popular and supported by the machinery manufacturing, equipment consume enterprises , as well as foreign trade circulation enterprises at home and abroad. After nearly 20 years of development, the degree of internationalization of China International Machine Tool Show has had a qualitative leap, 2012 will be unprecedented.

CIMES2012
A&E took part in CIMES2012

CIMES2012

“PeiTian” is from Lao Tzu’s [Tao TeChing] Article 18th paragraph:

A good warrior is not bellicose,
A good fighter does not anger,
A good conqueror does not contest his enemy,
One who is good at using others puts himself below them.
This is called “integrity without competition,”
This is called “using others,”
This is called “parity with heaven,” – the pinnacle of the ancients.

Tao is the origin of the universe,the Tao is the natural law. It is invisible but everywhere now and then. Follow the rules of the “Tao”, Tao is the natural law, matural leads to success.

The name “PeiTian” contains the hope of enterprise leaders, “continued to do things that comply with the law “, like the Yellow River and Yangtze River .” PeiTian ” is both a heritage also is to carry forward, and also the interpretation of “broken then success, constant then broken”?, the law of the Tao and innovation and development.

Our Vision
A&E group is committed to being the global leader of industrial machine tools and key part supplier in the intelligent precision processing, and then to become provider of industrial technologies and end-to-end network solutions. PeiTian group provides innovative products and solutions that will promote operations of automotive, aviation, energy, heavy machinery, farm machinery, textiles, medical equipment and other engineering field more efficiently and accurately.

Our Mission
Alliances with our customers and partners , integrate our unique capabilities and advantages to serve for our customers, ensure that companies maximize the value. Grow together with China’s equipment manufacturing and precision mechanical and electrical industries to make the basis for changing from “made in China” to “created in China”.

Our Core Values
A&E Group is committed to building a mature professional team, continuing to do things that comply with the law, improve core competitiveness, and improve the multi-technology common manufacturing platform, nurture innovation, technical and management personnel. A&E Group has a large number of high-tech talent from top universities, as well as R & D team led by world-class experts. Six different product lines across many fields of machinery, electronics, materials, manufacturing, processing, forming, assembly and testing. A&E Group owns two production bases located in Anhui Province and Shenzhen. With advanced technology R & D and manufacturing philosophy, we have created the business model of multi-technology integration services, provide one-stop service for global industry-leading companies in the rapidly growing equipment manufacturing field.

We will absorb with humble and pious heart; whole hearted devotion to public duty with austerity and honest heart; prepared for danger in peace time with vigilance and vigilant heart ; pragmatic and innovation with rigorous and scientific heart ; expand our business with a positive and progressive heart; excellent, sustainable results back to society! we invite more partners and experienced technical and management personnel to join us, adhering to multilateral win and all-win strategy to create more value for our customers!

Exclusive network reported media Vogel online, live.

More video coverage, stay tuned Vogel online.

CIMES2012 interviewed Mr. Liyang Suo, the R&D Director of A&E

Posted on June 15, 2012

Vogel Online News: The 11th China International Machine Tool & Tools Exhibition was held again from June 12th to 16th in China International Exhibition Center. Vogel Media interviewed Mr Liyang Suo, who is the R&D Director of A&E, and Mr Suo showed the main exhibited products and solution plans. This exhibition provides a source and trade platform of China, which is also the biggest machine tool producer. CIMES was held together by China National Machinery Industry Corporation and China National Machine Tool Corp, it is not only a famous exhibition in the field of machine tool and tools but also have a great influence both in home and aboard.

Interview

“Pei Tian” from the chapter 68 in THE TAO TEH KING. It says: A good warrior is not bellicose, A good fighter does not anger, A good conqueror does not contest his enemy, one who is good at using others puts himself below them. This is called “integrity without competition,” This is called “using others,” This is called “parity with heaven,” – the pinnacle of the ancients
Tao is the origin of the universe, Tao is also the formula of Nature. Tao is invisible, but it exists everywhere, in any time and place. We need to keep the rules of Tao, Tao is nature, and nature is heaven.
From the name of company “ PEI TIAN” we can sense the great expectation of the leaders to the company. It reminds us we need to follow the rules and regulations so that our business can be a successful one. “ PEI TIAN” is not ony protection but also development. It also implies the idea of Broken is made, made is for break” which is also the TAO’s idea.

Interview

Interview

Our Vision
A&E has been committed to be the world’s leading provider company which products industrial machine tools and intelligent precision industry key components, to be the internet industry technology client to client and issue solving provider. By the innovation products and solution, A&E makes auto industry, power industry, aircraft industry, energy industry, heavy machinery, agricultural industry, textile industry, medical applications and other engineering domain more efficient and precise by supporting innovative products and solutions.

Interview
The exhibits of A&E

Interview
Mr Suo introduces the products of A&E

Interview
The exhibits of A&E

Interview
The exhibits of A&E

Our Missions
Allying with the partners and our customers, integrating our unique abilities and advantages to serve our clients to ensure the maximal value of the company.Growing together with China’s equipment manufacturing and precision mechanical and electrical industries, preparing for Chinese manufacturing to Chinese creation.

A&E applies itself to build a mature professional team, to continue doing things complying with the law, to ceaselessly improve its core-competiveness, to consummate the common manufacturing platform of multi-technology, to nurture innovative technology and management person. A&E has a large number of high-tech talents from top universities, as well as R&D team led by international experts. Six different product lines across the fields of machinery, electronics, materials, manufacturing, processing, forming, assembly, testing, etc. The two production bases of A&E are located in Anhui and Shenzhen. With advanced technology and manufacturing philosophy, we created a business model of multi-technology integration services, and provide one-stop service for global industry-leading companies.

We will be humble and pious to learn widely from others’ strong points; we will be simple and honest to work selflessly for the public interest; we will be stable and vigilant to think of danger in time of peace; we will be strict and scientific to be pragmatic and innovative; we will be positive and progressive to expand our business; we will use outstanding and sustainable results to repay the society! We hope that more and more partners and experienced technical and management person will join us, we take the strategy of win a total of richer to create more value for our customers!

A&E took part in the 11th China Int’l Machine Tool & Tools Exhibition

Posted on June 13, 2012

China Int’l Machine Tool & Tools Exhibition is the international platform accepted by the global buyers and sellers to get know the latest technology and development trend, is a vane of worldwide leading advanced manufacturing. The 11th China Int’l Machine Tool & Tools Exhibition(CIMES2012) will be held from June 12th, 2012 to June 16th, 2012 in Beijing new CIEC, A&E will take part in it with our new products. Welcome to our booth: A603 of W2.

During the 5 day long’s exhibition, A&E will show several types of industrial robots,CNC,servo drive,motors and general machine tools and total solutions of CNC.Two 50kg industrial robots and one 16kg industrial robot danced with the music.A&E’ s high level CNC is the brightness of this exhibition. Please enjoy the video of our industrial robot’ dance: http://v.youku.com/v_show/id_XNDEzMDYyOTg4.html

At the beginning of the exhibition, so many visitors visited our booth.

Exhibition

Our industrial robots were dancing with the music, their beautiful dance attracted many customers.

Exhibition

Many domestic and foreign customers came to consult our products, showing great interest in our products.

Exhibition

Except industrial robots, we also exhibit other products, such an high level CNC and fine machine tool.

Exhibition

Exhibition

A&E took part in Thailand 2011 METALEX Exhibition

Posted on December 29, 2011

Many Thailand’s industrial parks were flooded because of the flood since July 2011, the flood lasted about 3 months, manyfactories’ equipment was destroyed. After the flood disaster, Thailand began massive post-disaster reconstruction work, so the machine tools and other industrial production equipment’s demand increases continuously. The reconstruction of Thailand’s factories, needs a large number of casting and machining equipment. One of A&E’s partner,Beijing Walker technology Ltd Company is promoting business in Southeast Asia, thus how to seize the business opportunities in post-disaster reconstructionin Thailand, is A&E and Walker’s an important purpose in the machine tool exhibition.

1. Introduction of Thailand METALEX machine tools exhibition
Thailand METALEX is held by REED EXHIBITIONS GROUP and REED TRADEX CO., LTD. It is held every year, 2011’s exhibition is the 24th exhibition. This exhibition is the largest and most authoritative machine tools professional exhibition in the southeast Asia. It’s well known in Thailand and the whole southeast Asia. Lots of products were first shown in Asian market, showing the latest technological and creative achievement. This exhibition was planned to be held during November 16th, 2011 to November 19th, 2011, but as a result of the flood disaster, it was delayed until December 21th, 2011 to December 24th, 2011. The exhibition was held in BITEC, it has 7 exhibition halls, 45,000 square meters in total, and more than 2,700 exhibitors took part in it. METALEX attracted more than 560,000 visitors from Thailand and ASEAN countries.

Exhibition

Post-disaster reconstruction was the theme of this exhibition. Japanese enterprises in Thailand have a wide influence, Thailand is one of Japanese car, electronics and other industrial production and export bases. Japan has more than 7,000 enterprises in Thailand. At present, many Japanese enterprises have been closed because of the flood. The Japanese-funded enterprises in Thailand are severely damaged, but in the reconstruction after the flood, Japanese machine tool plant is the largest beneficiary. As a result, Japanese machine tool orders from Thailand began to increase significantly.

2、Introduction of Exhibitors
Most of Thailand’s domestic industry are from Japan, such as Japanese auto factory, engineering machinery factory, electronics manufacturers. Thailand’s heavy industry is underdeveloped, the main heavy engineering equipment are basically depend on imports. The famous exhibitors are Taiwan’s Machtech, Feeler, Japanese Toyo Seiki and so on.

Exhibition

Chinese booth is in HALL 105, the manufacturers are relatively small, mainly are cutting tools, welding machine and other auxiliary equipment.

3 、Robot application is the highlight of Thailand 2011 METALEX
Thailand’s characteristic is that the service industry is highlydeveloped, the overall wage level is relatively higher than China. Industrial robot automation is in demand in Thailand, as a result, there are many robot exhibitors in this exhibition.

Exhibition

Exhibition

Exhibition

Exhibition

Exhibition

A&E 50kg Industrial Robot’s First Show in Exhibition

Posted on November 18, 2011

13th China Dongguan International Mould& Metalworking Exhibition13th China Dongguan International Plastics, Packaging & Rubber Exhibition was held in GD Modern International Exhibition Center on November 16th, 2011, A&E took part in it as an exhibitor. A&E 50kg six axis industrial robot was shown during the exhibition for the first time, stunning the audience. Lots of customers and visitors visited A&E and were interested in A&E’s products.

Exhibition

A&E Launched the Second Industrial Robot

Posted on October 31, 2011

A&E, national leading provider on machine tools & industrial automation solution, currently announced their second industrial robot – RP50A will be released by Beijing R&D Center by October. This new product, designed by Beijing R&D Center after their first industrial robot – RP10A,not only consolidated A&E’s technical leading position, but also indicated that industrial robot product and its key parts will be local-designed completely.

Exhibition

RP50A, the second product of A&E industrial robot series, is a world leading six-axes industrial robot with the feature of precision positioning, intelligent and efficient path control. Key parameters include 250kg-weight, 50kg-payload, 1800mm-reach. It can keep running 10,000hous with less than 50 hours suspend, so as to commit 7-24 working of foundry industry with 20% efficiency enhanced. Key parts can peer with global leading company like ABB, Fanuc. With outstanding performance in welding, printing, handling and packaging, RP50A can be widely used in automotive, electronics, food/beverage, pharmacy, medical machine industry. Especially for 700-900 tons foundry industry, this product has obvious advantages to provde high efficiency die-casting and assembling solution.

Exhibition

A&E Beijing R&D Center founded in 2010, is becoming the central of A&E industrial robot series. During the designing of RP50A, 20 invention patents & utility patents have been submitted together with some papers about control algorithm and precision. Meanwhile, Beijing R&D Center makes long term cooperations with Beijing Jiaotong University, Tsinghua University and Harbin Institute of technology to promote science and technology innovation together.

Exhibition

Completion of the New Office in Beijing

Posted on September 23, 2011

In October 2011, the new office on the first floor of the Beijing R & D Center site will be delivered, marking that A&E Beijing will jump into a new stage. The building area of the new office on the first floor takes upto 600 square meters, including laboratories, office areas, conference rooms and leisure areas. The decoration style is stylish and practical, leading the life of the forefront of technology, embodied the culture of enterprise.

White tone of the office environment creates grand, clear and open atmosphere, which makes the staff working in a comfortable and modern environment to show their talent. Spacious open office, no crowded feeling, together with the green plants present our efforts to improve the working environment and relieve working pressure. The relaxing lounge area is completely life-style, fully embodies the people-oriented approach to the enterprise.

A&E Complete the 1st Five-Axis Universal Gear Machining Center with Days

Posted on September 13, 2011

The leading domestic machinery and equipment manufacturing, industrial automation solutions provider A&E Grouptoday announcesthat the BeijingR & D center is about to launch the first five-axis universal gear machining centerin domestic in November.This is revolutionary achievements in research and developmentof Beijing R & D center of A&E Group, and has broken themonopoly situation of big modulus gear technology by the USA, Japan and Europe. Itnot only to consolidate the A&E group in the domestic technology leading position, and also adumbrative that big modulus gear products will meet the needs of various sectors of the flexible gear machining center growing demandof domestic and overseasfrom now on.

Exhibition

The five-axis universal machining center is provided revolutionary big modulus gear advanced manufacturing technology by A&E group, which uses hollow turret structure, and can complete all processing operationincluding cylindrical, bevel gear, various types of gear and turbine pair gear-shapedby using universal tools on the same machine.The machine structure is compact, easy to use, high processing efficiency, high precision and low running costs. It can be widely used inindustry such as automotive, aerospace, electric power, shipbuilding, medical technology and so on. As the first five-axis universal gear machining centers in domestic, It was invited to participate the exhibitionin exhibition center in Zhongguancunand added a lot of high-tech elementsfor the entire exhibition center .

Exhibition

The five-axis universal machining centernot only has its unique design structure and advantagesin the CNC system, distributed Longmen frame, rotary table, the structure design of pendulum angle head, and also uses thekey technologyof independent development of five- axis linkage gear processing algorithm , whichapplies algorithm of five-axis interpolation about application developmentindependent in spur, helical gears, bevel gear, spiral bevel gear, herringbone and other gear to the five-axis CNC system, so that makes the five-axis CNC system high performance work, and achieves satisfactory effect. The processing center of the gear not only significantly enhance the manufacturinglevel of big modulusgear and also fully improves the utilization rate of energy, and more important is fundamentally driving theupgrade of industry.

A&E RP10A Robots in Zhongguancun Science & Tech Innovation Exhibition

Posted on August 1, 2011

Recently, the A&E (Affluence & Eternity) Group were invited to “Zhongguancun Science and Technology Innovation Exhibition “held in Beijing. At the same time, Lenovo, China digital, Baidu, Zhongxing, Hanwang and a number of Zhongguancun enterprise representatives, in this many to show in the enterprise. All products are independent research and development of high-tech innovation products, A&E displayed six shaft industrial robots- RP10A, which is independent research and developed by A&E group. RP10A compared with all products in the exhibition, not only reflect A&E group Beijing R&D center super innovative strength, and indicates that our country in the new information technology in the forefront of the world go.

Exhibition

RP10A is to A&E group in the first paragraph of robot products, it is also the world leading technology of six shaft multi-purpose industrial robots, has the agile and compact structure, function, the characteristics of small size and little weight. This kind of robot 10 Kg payload, working range of up to 810 mm, ranks in the industry leading level. Any Angle down installation and hang wall installation are optional installed. Although cabinet flexible, but working ability is very strong, and can be widely used in arc welding, cleaning, spray, handling, assembling, etc. Figure is to A&E industrial robots RP10A-the scene, the scene of working process and the results show that RP10A to its small body can complete the high accuracy of the works, fully embodies the RP10A control in the application and advantages.

Exhibition

High-tech product cannot leave the excellent talented designers, A&E group can display so good products with the A&E designers with excellent talent, A&E Beijing R&D center has the most excellent scientific research personnel, they is to A&E group Beijing R&D center innovation strength of the main body, we can believe that these filled with wisdom and patriotic zeal youth will design more excellent products, led the A&E group in the development of science and technology in the forefront of the wave to the world, on the world stage in the strength of the highlights China.

Exhibition

Next Page »

Stay connected with us in your favorite flavor!